NS-2 Amendments

The current revision of NS-2 is Rev 0, November 1999.

Below are amendments which have been made to the current revision and which will be included in the next revision of NS-2

Publication  No.

 Details

 Pages/Sections Affected

Date

Amendments
AM 01 Hardbanding Page 33, Section 2.14.6
Page 40, Section 3.1.1
12/05/02
AM 02 Internal Visual Inspection Page 13, Section 2.2.4.5
Page 99, Section 4.3.6
Page 102, Section 4.4.3.3
Page 105, Section 4.5.3
Page 106, Section 4.6.3
13/05/02
AM 03 Surface Preparation Page 13, Section 2.2.4 20/01/03
AM 04 Bit Box Bevel Diameters Page 49, Section 3.4i 27/01/03
AM 05 Drillstring Sub Lengths Page 90, Section 3 27/01/03
AM 06 WT 26 Min OD Page 65, Section 3.1 12/02/03
Supplements
SP001 Integral Joint Tubing 0  
SP002 Fishing and Milling Tools 0  
SP003 Grant Prideco Prop Tool Joints 1  
SP015 Abandonment Tools Inspection Requirements 0  
SP006 Casing and Tubing Crossover Inspection Requirements 0  
SP007 Cementing Tools Inspection Requirements D  
SP012 Coring Equipment Inspection Requirements 0  
SP004 Adjustable Stabilisers Inspection Requirements 4  
SP008 DST Tools & DST Circulating Tool Inspection Requirements 0  
SP005 Liner Running Tools Inspection Requirements 0  
SP009 Inflatable Packers Inspection Requirements 0  
SP013 Gravel Pack Running Tools Inspection Requirements 0  
SP014 Wellhead Running Tools Inspection Requirements 0  
SP011 Refurbished Bits Inspection Requirements 0  
SP010 PBR Cleanout Tools Inspection Requirements 0  
Bulletins
BUL 001/03 Interchangeable Connections   August 2003

Full details of these amendments have been forwarded to all NS-2 copy holders who have a live maintenance contract.

If you have not received copies of these amendments, please contact alison.law@fearnleyprocter.co.uk

If you have other queries regarding NS-2, please contact steve.minnoch@fearnleyprocter.co.uk